Clear Steps to Remove and Install a 2006 2007 2008 2009 Ford Fusion 4-door Sedan Car Radio with Bluetooth GPS Navigation System

Noways, if you are fed up with your factory radio, you can think about replacing it with a brand new multifunctional car radio. If you have some related installation experience and a correct installation guide, you can also try to remove the factory radio and install the new car radio yourself. This article mainly introduces a 2006 2007 2008 2009 Ford Fusion 4-door Sedan car radio installation guide from Seicane to you. If you own the same or similar dashboard, you can refer to the following guide.

2006 2007 2008 2009 Ford Fusion 4-door Sedan Car Radio after installation

2006 2007 2008 2009 Ford Fusion 4-door Sedan Car Radio after installation

Precautions for this installation:

1. Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2. Please make sure that all fastened wires are isolated with electrical tape.

3. Please make sure the ignition is off to avoid short circuit.

4. For your convenience, here’s therecommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2006 2007 2008 2009 Ford Fusion 4-door Sedan car radio installation guide

Step 1: Remove the trim around gear shifter.

Remove the trim around gear shifter

Remove the trim around gear shifter

Step 2: Remove screws securing center console lid with a screwdriver.

Remove screws securing center console lid with a screwdriver

Remove screws securing center console lid with a screwdriver

Step 3: Remove the center console trim.

Remove the center console trim

Remove the center console trim

Step 4: Remove console side panels on both driver and passenger sides.

Remove console side panels on both driver and passenger sides

Remove console side panels on both driver and passenger sides

Step 5: Remove bolts securing radio bezel and AC controls.

Remove bolts securing radio bezel and AC controls

Remove bolts securing radio bezel and AC controls

Step 6: Unplug AC controls (from passenger side).

Unplug AC controls (from passenger side)

Unplug AC controls (from passenger side)

Step 7: Remove the radio bezel and AC controls.

Remove the radio bezel and AC controls

Remove the radio bezel and AC controls

Step 8: Remove screws securing radio to the vehicle, and take the original radio out of the dash.

Remove screws securing radio to the vehicle, and take the original radio out of the dash

Remove screws securing radio to the vehicle, and take the original radio out of the dash

Step 9: Check all the accessories for the new Seicane radio.

Check all the accessories for the new Seicane radio

Check all the accessories for the new Seicane radio

Step 10: Connect the harnesses to the back of the new Seicane radio.

Connect the harnesses to the back of the new Seicane radio

Connect the harnesses to the back of the new Seicane radio

Step 11: Connect the Seicane radio to your original car radio’s plugs, and put the new Seicane radio into the dash.

Step 12: Turn on the new Seicane radio and check whether the radio is working properly.

Step 13: Install all screws, trims, panels, bolts and the radio bezel and AC controls into their original place.

 

 

Wish you can learn some skills from the above installation guide. If you have any doubts, please feel free to contact your dealer, communicate with someone experienced or turn to a professional for help. Or if you think it hard for you to finish the whole installation process, you’d better directly arrange a professional technician to help you install the new car radio.

And to help you select a suitable car radio for your beloved car, here I would like to share a remarkable 2006 2007 2008 2009 Ford Fusion 4-door Sedan car radio from Seicane with you. For more details, please click:

https://www.seicane.com/aftermarket-radio-android-hd-touchscreen-dvd-player-for-2006-2009-ford-fusion-4-door-sedan-car-stereo-gps-navigation-system-bluetooth-phone-wifi-support-1080p-video-obdii-dvr-steering-wheel-control-s6949

This car radio is loaded with the latest Android 7.1 operation system and a powerful quad-core CPU processor, so you will get a smoother, faster and easier operation experience thanks to its higher capabilities and better performance.

Even you don’t have good sense of directions, you won’t get lost thanks to the worldwide real-time GPS navigation system of high accuracy. Through the turn-by-turn directions and voice prompts provided by the 3D GPS function, you are able to locate where you are currently and navigate to any locations you would like to go to. Additionally, this unit’s dual zone function enables you to listen to your favorite music while navigating.

What’ more, under the wireless Bluetooth technology, you can pair your Bluetooth-enabled mobile phone with this unit so as to get access to both Bluetooth hands-free phone calls as well as Bluetooth streaming music. Therefore, you will gain a lot of fun.

Wish you like this unit and good luck to you!

This entry was posted in Uncategorized and tagged . Bookmark the permalink.

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>