Do you want to keep relaxed and entertaining all the way on a long boring and tired? Or do you want to keep your kids or passengers quiet and pleased in the back seats? If your answer is yes, then you can consider to replace your factory radio with a new aftermarket head unit which comes with a lot of practical entertainment features. Since the installation of a modern head unit is not quite difficult, so that some car owners can finish it by themselves with a correct installation guide. If you are a car owner of a 2010-2013 VW Volkswagen POLO, you can read this VW Volkswagen POLO car stereo installation instruction carefully to make clear every step before you start it.
Precautions:
- Please apply the parking brake and remove the negative cable on the vehicle battery before the removal to ensure security.
- A lever and a screwdriver need to be prepared before the installation.
Please refer to the below step-by-step removal and installation instructions for 2010-2013 VW Volkswagen POLO car stereo as a reference:
Step1: Remove the trim panel.
Please pry around the trim panel with a lever. While prying, please loosen the trim panel with your one hand. When the trim panel is loosened, please remove the trim panel off the dashboard and gently place it aside for further removal.
2010-2013 VW Volkswagen POLO car stereo installation step 1
Step2: Remove the four screws on the radio.
Please unscrew the four screws which are holding the radio at four corners with a screwdriver. Then keep them well in a small box for the installation of a new head unit.
2010-2013 VW Volkswagen POLO car stereo installation step 2
Step3: Take the factory radio out of the dash.
After the four screws are unscrewed, you can easily pull the factory out of the dash.
2010-2013 VW Volkswagen POLO car stereo installation step 3
Step4: Disconnect the wiring harness.
Before you put the factory radio aside, please disconnect the wiring harness at the back of the factory radio.
2010-2013 VW Volkswagen POLO car stereo installation step 4
Step 5: Connect the new Seicane car stereo to the original wiring harness as the user manual or the wiring diagram shows.
Step 6: Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
Step 7: Put the new Seicane car stereo into the dash and install the four screws.
Step 8: Install the trim panel into its original place.
That’s all about the installation guide for a VW Volkswagen POLO car stereo. There may be some differences on the dashboard among different car models and manufacture years. But there won’t be a lot difference on the installation. You can ask your dealer for the exact one for your car. To make sure you have the right car stereo to install in your car, you can check out the following link which is an intelligent Seicane 2010-2013 VW Volkswagen POLO car stereo with a wide range of features.
This VW Volkswagen POLO car stereo is loaded with an Android 4.4.4 operation system and a 1.6 GHz Cortex A9 Quad-core CPU to greatly enhance the processing ability. With a reasonable price, you can arrive at your ideal destination on time with the help of the GPS system. What’s more, you will be keep pleased with the powerful entertainment features which can be compatible with a lot of multimedia formats like DVD/VCD/CD/MP3/MPEG4/DIVX/CD-R/WMA/JPEG, etc. Wish you’ll enjoy all your trips with this fantastic VW Volkswagen POLO car stereo! Good luck to you!