A step-by-step installation guide for a universal car stereo with GPS navigation system DVD player Bluetooth touch screen

If you want to get more convenience and enjoyment in one car radio, the best way is to replace your factory radio with a new car stereo which is compatible with many features. To install a new car stereo in your car, a detailed installation guide is necessary for you. Here I’d like to share a step-by-step installation instruction for a universal car stereo from Seicane, which can be helpful for you if you are going to upgrade your factory radio.

Universal car stereo after installation

Universal car stereo after installation

 

Some tips before the installation:

  1. Please disconnect the power before the installation.
  2. Please prepare a lever and a screwdriver before the removal and the installation.
  3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

 

A universal car stereo installation guide

1·Remove the original console panel with a plastic knife, pry gently along the gap and pick up the panel. Then set it aside.

Universal car stereo installation step 1

Universal car stereo installation step 1

2·Remove the four screws that fixed the radio on the dashboard.

Universal car stereo installation step 2

Universal car stereo installation step 2

3·Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.

Universal car stereo installation step 3

Universal car stereo installation step 3

4·Unplug the connectors at the back of the factory radio.

Universal car stereo installation step 4

Universal car stereo installation step 4

5·Remove the brackets on both sides of the factory radio. So far the removal of the factory radio is completed. Next steps will move to the installation of the Seicane aftermarket car stereo.

Universal car staereo installation step 5

Universal car staereo installation step 5

6·Install the brackets on both sides of the Seicane car stereo.

7·Dock the connectors of the original vehicle and the upgraded car audio.

Universal car stereo installation step 7

Universal car stereo installation step 7

8·Insert the wires to the appropriate location of the upgraded stereo. If you are not sure about how to wire correctly, you may refer to the wiring diagram for details.

9·Fix the Seicane car stereo with the four screws.

Universal car stereo installation step 9

Universal car stereo installation step 9

10·Firm the console panel. Finally the new Seicane stereo is installed and a comprehensive test should be conducted on the new radio.

Universal car stereo installation step 10

Universal car stereo installation step 10

 

Wish you can get some help from the above installation guide. If there is any question, please don’t hesitate to ask your dealer or a professional. A wiring diagram for the installation can be much helpful from the dealer. However, if you don’t have any installation experience at all, it’ strongly suggested you go to a car stereo center to install it or have a professional install it.

 

To have a successful car stereo upgrade, you need to have a correct stereo which can fit your car. If you don’t have one, I’d like to recommend an ideal universal car stereo from Seicane to you, for more details, please check:

 

http://www.seicane.com/android-radio-gps-navigation-system-for-universal-double-din-with-capacitive-touch-screen-tpms-dvr-obd-ii-headrest-monitor-control-usb-sd-bluetooth-3g-wifi-video-aux-rear-camera-s088688

 

This universal car stereo comes with a number of advanced features for you to upgrade your factory radio, including 3D GPS navigation, Bluetooth hands-free calls, Bluetooth streaming music, DVD, CD, VCD player, TV, iPod, USB, SD, etc. Simply press the GPS button, you can go anywhere you’d like with the text-to-speech guidance. The connectivity of backup camera is available to make your parking easier.

 

Hopefully you will enjoy this multifunctional universal car stereo and have a wonderful trip with it in the future.

This entry was posted in universal and tagged . Bookmark the permalink.

One Response to A step-by-step installation guide for a universal car stereo with GPS navigation system DVD player Bluetooth touch screen

  1. seneswove says:

    https://buystromectolon.com/ – can you buy stromectol over the counter in tijuana, mexico

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>