When you are heading to your destination, an accurate GPS navigation system can help you find the best way within the least time and guide you there with ease. If your factory radio can’t support GPS function, you can upgrade it with a multifunctional car stereo with GPS navigation. The following is a step-by-step installation guide from Seicane for a NISSAN Universal car stereo, if you also have the same dashboard as the picture below, you can also refer to it to help with the installation.
Some tips before the installation:
1.Please disconnect the power before the installation.
2.Please prepare a lever and a screwdriver before the removal and the installation.
3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
Universal car stereo installation guide
Step 1: Use a screwdriver to remove two screws above the original car radio.
Step 2: Remove the trim panel.
Please wedge a flat tip screwdriver under the trim panel and pry up on it to remove the trim panel. To protect the trim from being accidentally scratched, you can use a clean rag while prying up on the trim panel.
Step 3: Unscrew the four screws which are holding the factory radio in place with a screwdriver. Then gently take the factory radio off the panel.
Step 4: Disconnect the radio antenna in the back of the factory radio and unplug the electrical plugs running to the back of the radio.
Step 5: Check all the accessories for the new Seicane car stereo.
Step 6. Connect the harnesses to the back of the new Seicane car stereo.
Step 7. Connect the Seicane car stereo to your original car radio ‘s plugs.
Step 8: Turn on the new Seicane car stereo to have a careful check if it works well with your car. If it doesn’t, please check whether all the cables are connected correctly.
Step 9: After the test, please put the new Seicane car stereo into the dash.
Step 10: Install all the screws and the trim panel into their original place.
All in all, you need to make clear about every step before you start to install this NISSAN Universal car stereo in your car. If there is any question, you can seek help from your dealer. If you don’t have any experience on the installation, it’s strongly suggested you ask a professional to install your new unit. If you are still looking for a suitable head unit for your car, I’d like to recommend an amazing NISSAN Universal car stereo from Seicane to you. Please click for more details:
The above is the Quad-core Android NISSAN Universal car stereo, which has GPS navigation system built-in, and Bluetooth, USB Port, SD card slots, car radio, RDS, iPod interface. You can replace your factory CD/radio this aftermarket head unit with navigation system, so you can play DVD movies and use GPS function on your long-distance trip. To have more fun in your car on the way, it’s the best choice for you to take this amazing NISSAN Universal car stereo with you.