If you have a plan to replace your factory radio with a new aftermarket car stereo but worry about the complicated installation, you can rest assured now, because the installation of a car stereo is actually quite simple. Some of car owners have demonstrated the successful installation on their own. With some related installation experience and a correct installation guide, you can also install by yourself. Please look at the following picture which is a modern Seicane 2006-2010 Ford Explorer(U251) car stereo after installation, if you have the same or similar dashboard, you can read this Ford Explorer(U251) car stereo installation instruction carefully.
2006-2010 Ford Explorer(U251) car stereo after installation
Here are some tips for you before the installation:
- Please apply the parking brake and remove the negative cable on the vehicle battery before the removal to ensure safety.
- A lever and a screwdriver need to be prepared before the installation.
2006-2010 Ford Explorer(U251) car stereo installation guide
Step 1: Remove the trim around gear shifter.
2006-2010 Ford Explorer(U251) car stereo installation step 1
Step 2: Remove screws securing center console lid with a screwdriver.
2006-2010 Ford Explorer(U251) car stereo installation step 2
Step 3: Remove the center console trim.
2006-2010 Ford Explorer(U251) car stereo installation step 3
Step 4: Remove console side panels on both driver and passenger sides.
2006-2010 Ford Explorer(U251) car stereo installation step 4
Step 5: Remove bolts securing radio bezel and AC controls.
2006-2010 Ford Explorer(U251) car stereo installation step 5
Step 6: Unplug AC controls (from passenger side).
2006-2010 Ford Explorer(U251) car stereo installation step 6
Step 7: Remove the radio bezel and AC controls.
2006-2010 Ford Explorer(U251) car stereo installation step 7
Step 8: Remove screws securing radio to the vehicle.
2006-2010 Ford Explorer(U251) car stereo installation step 8
Step 9: Take the original radio out of the dash.
Step 10:Make antennas and cables of the new Seicane car stereo connected step by step as installation instructions show, and you should be very careful when you are doing this for it will affect the whole procedure.
Step 11: Put the new Seicane car stereo into the dash.
Step 12: Turn on the new Seicane car stereo and check whether the radio is working properly.
Step 13: Install all screws, trims, panels, bolts and the radio bezel and AC controls into their original place.
Wish you car get help from the above installation guide for a Ford Explorer(U251) car stereo. If you have any questions, please don’t hesitate to ask your dealer or a professional. If you think it hard to finish on your own, you’d better ask a technician or go to a car stereo center to have it installed.
To have a successful car stereo replacement, you also need to have a suitable stereo for your car. If you are still looking for one, the following Seicane Ford Explorer(U251) car stereo is your best choice, for more details, please click:
This Ford Explorer(U251) car stereo comes with a large 7 inch multi-touch screen with HD 1024*600 pixel resolution, you are able to enjoy a crystal clear display for the videos. The most accurate guidance and voice prompts are provided to you to find your way to the destination on time and stress freely. You can also link your mobile phone with this unit to have hands-free calls and stream music to have a safe and happy journey.
Just have fun in your car with this powerful Ford Explorer(U251) car stereo on all your trips from now on! Take it and go right now!