If you find your factory radio can’t meet your needs any more, then it’s wise of you to replace it with a new multifunctional car stereo which comes with high configurations and excellent performance for you to upgrade your factory radio. This article is a step-by-step 2002-2010 Chrysler PT Cruiser car stereo installation guide from Seicane, you can refer to it if you also have the same dashboard as the following image.
2002-2010 Chrysler PT Cruiser car stereo after installation
Some tips before the installation:
- Please disconnect the power before the installation.
- Please prepare a lever and a screwdriver before the removal and the installation.
- Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
2002-2010 Chrysler PT Cruiser car stereo installation guide
1.Loosen the trim panel with a lever.
1.Loosen the trim panel with a lever
2.Take the panel off the dash and disconnect the wires from the car.
2-1.Take the panel off the dash and disconnect the wires from the car.
2-2.Take the panel off the dash and disconnect the wires from the car.
3.Remove the four screws which are holding the unit with a screwdriver.
3.Remove the four screws which are holding the unit with a screwdriver.
4.Take out the unit and disconnect the wire harness at the back of the unit.
4-1.Take out the unit and disconnect the wire harness at the back of the unit.
4-2.Take out the unit and disconnect the wire harness at the back of the unit.
5.Connect the new wiring harness adaptor to the car, then, to the unit.
5-1.Connect the new wiring harness adaptor to the car, then, to the unit.
5-2.Connect the new wiring harness adaptor to the car, then, to the unit.
6.Connect the wire as the user manual shows and put the new unit into the dash.
6.Connect the wire as the user manual shows and put the new unit into the dash.
7.Turn on the new unit and have a test if the new Seicane stereo is working without problem..
8.Put trim panel back on your new Seicane stereo after the normal test.
Wish the above installation guide for a 2002-2010 Chrysler PT Cruiser car stereo can be helpful for you. If you have any question during the process of installation, you can ask your dealer for help. If you can’t do it on your own, it’ s suggested you ask a professional for help.
Do you find a suitable radio for your car? If not, I’d like to share a great Chrysler PT Cruiser car stereo from Seicane with you, it’ s an ideal stereo with the most advanced features for you to upgrade your factory radio, please click for more details:
This amazing Chrysler PT Cruiser car stereo comes with a lot of advanced and practical features which include 3D GPS navigation, bluetooth technology, DVD CD player, FM/AM radio, TV, Ipod, wifi, USB and SD card connection, etc, its’ your best choice for you to take your car radio functions up a notch. Coming with an appealing firmware, it’s the best choice for you to upgrade your in-car environment now. Besides, the functions of your steering wheel control will still be retained after installation. Just go and have a great time with it!
Viagra Depoxetine