A detailed installation instruction of a 2006-2011 Opel Corsa head unit with touch screen 3G WiFi DVD player GPS navigation

Here comes a 2006-2011 Opel Corsa head unit from Seicane after installation, which can bring great convenience and enjoyment for you while you are driving. It looks quite pretty, doesn’t it?

 

When replacing the factory radio with a new car radios more and more popular with car owners, to know how to install a new radio is becoming essential as well, which can help you replace a radio easily and quickly. If your dashboard is the same as the above, you can refer to the following 2006-2011 Opel Corsa head unit installation guide.

 

Here are some tips for you before the installation:

 

1.Please disconnect the power before the installation.

2. A lever and a screwdriver need to be prepared before the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible, so each related part of the unit can be fixed securely.

 

2006-2011 Opel Corsa head unit installation guide

1.Insert the removal tools into the small holes in both sides of the original radio.

 

2.Take the original radio out of the dash by pulling the removal tools a little and pulling it out with your hands.

 

3.Disconnect the connector at the back of the original radio.

 

4.Take out the screws and tidy some wires to inner place.

 

5.Pry the trim panel with a lever, release and remove it.

 

6.Plug antennas as the pictures show below.

 

7.Use a screwdriver to pull out the side panel, then take out lower side panel in front of file.

 

8.Make red long line inserted down through the side panel and up through removed panel in front of file, then firm the side panel.

 

9.Sort cables and interfaces as the picture shows below, tidy all of them to the right space.

 

10.Connect the red cable to the right position.

 

11.Connect the red cable with the removed small panel in front of file and reinstall it.

 

12.Make connection for cables and interfaces between the new Seicane head unit and the car.

 

13.Then connect the two outside cables to the back of the new Seicane head unit, then put new radio into the dash and install removed panel into its original place.

 

Wish the above 2006-2011 Opel Corsa head unit installation instructions can be helpful for you. If you have any questions, please don’t hesitate to ask your dealer or a professional. If you find it too hard for you to understand all the steps, it’s suggested you go to a car stereo center to replace your head unit or ask a professional to install it.

 

If you buy a head unit on your own, it’s quite important that you make sure you find a fitting head unit for your car. Here I’d like to share a 2006-2011 Opel Corsa head unit from Seicane for you check, please refer to the following link:

 

http://www.seicane.com/seicane-s127681-android-4-4-4-in-dash-gps-radio-aftermarket-stereo-for-2006-2011-opel-corsa-with-quad-core-cpu-3g-wifi-cd-dvd-player-bluetooth-music-mirror-link-obd2-backup-camera-steering-wheel-control-16g-flash

 

You can easily get to your destination with the accurate directions and voice prompts provided by the GPS system. You are available to pair your Bluetooth-enabled cell phone with this unit to dial and receive calls with your hands still on the steering wheel control.

 

A multiple entertainment formats are supported, including DVD/VCD/CD/MP3/MPEG4/DIVX/CD-R/WMA/JPEG, which enables you to have more options to have fun. This 2006-2011 Opel Corsa head unit is under a big discount at present, it’s time for you to upgrade your factory radio right now!