Have you ever upgraded your factory radio? If not, you can try replacing it with a multifunctional head unit which can support a wide range of features if you want to get more convenience and enjoyment in your car. To install a new head unit is not too difficult, and you can make it easier by referring to a step-by-step installation guide. If you have a 2004-2008 Chrysler Pacifica head unit, then you can follow this detailed Chrysler Pacifica head unit installation guide from Seicane.
2004-2008 Chrysler Pacifica head unit after installation
Precautions for this installation:
1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.
2.Please make sure that all fastened wires are isolated with electrical tape.
3.Please make sure the ignition is off to avoid short circuit.
2004-2008 Chrysler Pacifica head unit installation guide
1.Loosen the trim panel with a lever.
1.Loosen the trim panel with a lever
2.Take the panel off the dash and disconnect the wires from the car.
2-1.Take the panel off the dash and disconnect the wires from the car.
2-2.Take the panel off the dash and disconnect the wires from the car.
3.Remove the four screws which are holding the unit with a screwdriver.
3.Remove the four screws which are holding the unit with a screwdriver.
4.Take out the unit and disconnect the wire harness at the back of the unit.
4-1.Take out the unit and disconnect the wire harness at the back of the unit.
4-2.Take out the unit and disconnect the wire harness at the back of the unit.
5.Connect the new wiring harness adaptor to the car, then, to the unit.
5-1.Connect the new wiring harness adaptor to the car, then, to the unit.
5-2.Connect the new wiring harness adaptor to the car, then, to the unit.
6.Connect the wire as the user manual shows and put the new unit into the dash.
6.Connect the wire as the user manual shows and put the new unit into the dash.
7.Turn on the new unit and have a test if the new Seicane unit is working without problem..
8.Put trim panel back on your new Seicane unit after the normal test.
Can you install this 2004-2008 Chrysler Pacifica head unit with the guidance of this installation instruction on your own? If not, you can ask a technician to help with you. Or you can go to a car upgrade center to install it. If there is any question, you can ask your dealer for help.
If you are still looking for an ideal head unit for your car, you are recommended to check this amazing 2004-2008 Chrysler Pacifica head unit from Seicane. It’s the latest unit with multiple features for you to upgrade your factory radio. Here’s the link, please check:
Designed as the same dimension as the factory radio, you can upgrade your car radio with this intelligent Chrysler Pacifica head unit without any gap in your car. The large 5 inch multi-touch screen makes it easier for you to operate the navigation while you are driving, so that you can smoothly get to your desired destination with the help of the turn-by-turn direction and voice prompts. You can also utilize the built-in bluetooth technology to have hands-free calls and stream music to keep safe and pleasant on all trips.