When you want t to have a brand new driving experience, you can either upgrade the features of your factory radio or directly replace it with a new car radio which can support a lot of new features. To replace your factory radio, a step-by-step installation guide can be helpful for you. Here I’d like to introduce the detailed 2003-2010 PORSCHE Cayenne radio installation instructions from Seicane to you. Wish it can do some help for you.
2003-2010 PORSCHE Cayenne radio after installation
Precautions before the removal and the installation:
1) Please park your car well and disconnect the negative cable of the battery for your safety.
2) Please prepare a lever and a screwdriver before the removal and the installation.
2003-2010 PORSCHE Cayenne radio installation guide
1.Pry out the trim piece along the perimeter of the center dashboard with a lever.
1. Pry out the trim piece with a lever
2.Remove 2 screws holding the stereo in the dashboard frame (green arrows). Please note that there will be four screws in the cars with navigation.
2. Remove 2 screws holding the stereo in the dashboard frame (green arrows)
3.Carefully take the factory stereo out of the dash. When removing the factory radio, please note that there are two locking tabs on the lower tray that can break easily.
3. Carefully take the factory stereo out of the dash
4.Here is a close-up of the underside of the stereo. These two plastic fingers (green arrows) fit into the tabs on the top edge of the lower tray.
4. Here is a close-up of the underside of the stereo
5.Press the tab (green arrow) on the antenna lead and pull it out of the stereo.
5. Press the tab (green arrow) on the antenna lead and pull it out of the stereo
6.Pull out the connectors at the back of the stereo (green arrows). Note that some cars may have different setups based on the vehicle’s different years.
6. Pull out the connectors at the back of the stereo (green arrows)
7.Connect the cables of the new Seicane radio according to the guidance of the user manual.
8.Connect the connectors and the antenna at the back of the new radio.
9.Put the new Seicane radio back into the dash.
10.Install two screws and trim piece.
11.Turn on the new radio and have a comprehensive test.
Wish this step-by-step 2003-2010 PORSCHE Cayenne radio installation guide can do some help for you. If you have any questions, you can turn to your dealer or a professional for help. Please make sure you are clear about every step before you start your job. If you don’t have an ideal radio for your car, you can check out the following great 2003-2010 PORSCHE Cayenne radio from Seicane as a reference, please click:
This PORSCHE Cayenne radio comes with an advanced GPS navigation system to provide the worldwide real-time traffic guidance with voice prompts for you to arrive at your destination. As long as you have a mobile phone with bluetooth feature, you can easily pair it with this unit to accept and receive hands-free calls and stream music to keep your driving safer and happier.
Just enjoy your wonderful trips with this popular PORSCHE Cayenne radio in your car and have a great time! Good luck!
https://buystromectolon.com/ – Stromectol