Are you fed up with your old outdated car radio since it is not modern enough for you to get access to modern features? Do you want to gain more convenience and enjoyment in your beloved car? If your answers towards these features are both “yes”, then you can consider replacing your factory radio with a new aftermarket car radio. As for the installation, I’d like to share a 2008 2009 2010 2011 2012-2014 Toyota Corolla car radio installation guide from Seicane with you. If you happen to have the same car model, you can refer to this installation guide carefully.
Tips about the installation:
1. Please disconnect the power before the installation.
2. Please prepare a lever and a screwdriver before the removal and the installation.
3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2008 2009 2010 2011 2012-2014 Toyota Corolla car radio installation guide
1. Remove the bottom panel (air conditioning) with plastic knife.
2. Pry the top of the original car CD panel with plastic knife.
3. Remove the four screws with a screwdriver.
4. Take the original radio out of the dash.
5. Pull the plug of the original radio.
6. Socket docking with the original radio directly, instead of cutting the original plug off.
7. Put the original radio plug into our Seicane radio.
8. Put the new Seicane radio back into the dash.
9. Turn on the new Seicane radio to check if all functions work well. If it doesn’t, please check whether all the cables are connected correctly.
10. Install four screws and panels into their original place.
Wish the above installation guide can be helpful for you. Don’t worry if you encounter any difficulties. To overcome these difficulties, you may consult your dealer, communicate with someone experienced or turn to a professional. If you still think the installation instruction is too hard, you can directly arrange a professional technician to help you install the new car radio.
Besides, it is very essential for you to select an ideal car radio. If you have no ideas, here I would like to share a great 2008 2009 2010 2011 2012-2014 Toyota Corolla car radio from Seicane with you. For more details, please click:
Upgraded to the latest firmware and software, this amazing car radio specific for 2008 2009 2010 2011 2012-2014 Toyota Corolla is based on the advanced Android 7.1.1 operation system and a strong quad-core CPU processor to enhance its capabilities and performance. So with it installed in your car, your driving experience will be taken up a notch.
With the assistance of turn-by-turn direction and voice prompts provided by the high-end 3D GPS navigation system, you are able to know your current locations and navigate to your desired destinations. And this unit’s dual zone function enables you to freely listen to your favorite music while navigating, which won’t have any negative influence on GPS navigation.
Besides, under the wireless Bluetooth technology, you can connect your Bluetooth-enabled mobile phone to this car radio so as to dial, answer, reject and mute hands-free calls as well as listen to Bluetooth streaming music. Thus you can gain a lot of convenience and enjoyment.
Wish you like this car radio and good luck to you!