At first show you a picture of Seicane 2013 2014 peugeot 301 Elysee Radio after installation. Do you think it’s cool and want to install one on your peugeot 301? Maybe you have never install a new aftermarket radio before. And here is some experience of radio installation I’d like to share with you.
2013 2014 peugeot 301 Elysee Radio after installation
There is a important thing you should do first, you should make it sure whether the new aftermarket radio fits your car well before the installation. I’d like to share a good unit of Seicane which fits 2013 2014 peugeot 301 Elysee with you:
This peugeot 301 Elysee Radio has intelligent android 4.4.4 operation system, high quality RK PX3 with 1.66 GHz frequency Quad-core CPU, and 8 inch HD 1024*600 Pixels multi touch screen with smooth operation high sensitivity.
Loaded with a lot of upgraded software and hardware components, this remarkable 2013 2014 peugeot 301 Elysee Radio will bring you a totally different driving experience for you. You can enjoy a visually radiant display and an easier operation on its 8 inch multi-touch screen with 1024*600 pixel resolution. The built-in GPS can support updating the latest traffic information and provide turn-by-turn voice direction for you to get to the desired location. You can enjoy playing DVDs, VCDs, bluetooth music, FM/AM radio tuner to enrich your journey. You can also connect your bluetooth-enable cell phone with this unit for hands-free calls and streaming audio to ensure a safe and cheerful journey. Your steering wheel control can still work after installation.
2013 2014 peugeot 301 Elysee Radio installation
1)Pry the trim panel on the radio with plastic tool, and pull it out of the dash.
2013 2014 peugeot 301 Elysee Radio installation step 1
2)Then unplug connectors behind the trim panel.
2013 2014 peugeot 301 Elysee Radio installation step 2
3)Now remove two hazard switch.
2013 2014 peugeot 301 Elysee Radio installation step 3
4)Set four radio remove tool in the radio and pull the radio out.
2013 2014 peugeot 301 Elysee Radio installation step 4
5)Disconnect connectors behind the radio.
2013 2014 peugeot 301 Elysee Radio installation step 5
6)Remove two screws fixing the hud in place.
7)Then remove the hud and set it aside.
8)Make antennas and cables connected step by step as the user manual shows, and you should be very careful when you are doing this for it will affect whole procedure.
9)Connected the new Seicane radio to your peugeot 301 Elysee, you should check whether your connections are correct, the new unit is in right position,and you’d better have a tidy for the cables.
10)If everything is OK, firm screws and make panels back on your new Seicane aftermarket radio.
Above is whole installation of peugeot 301 Elysee Radio, just replace your factory radio and enjoy your new driving experience.