2010 2011 2012 Toyota Verso radio gps navigation system installation

Are you familiar with this picture?It’s the head unit after installation,dvd player of 2010 2011 2012 Toyota Verso.

head unit after installation,dvd player of 2010 2011 2012 Toyota Verso

head unit after installation,dvd player of 2010 2011 2012 Toyota Verso

Nowadays, economy is developing in a very amazing speed.People’s life standard is getting higher and higher. Cars have became a normal family transportation, so people will try their best to make car settings more convenient and comfortable.Roads become complex with the exploitation of land,therefore installing a precise GPS navigation system is very necessary,it benefits people not only to spend more vigor on thinking about where to go but also safer. There’s no doubt that we will pay more attention on 2010 2011 2012 Toyota Verso radio gps navigation system installation,which will be showed in the following part if you are a owner of Toyota Verso.

Before starting to acquaint it,there are some announcements for you:

please check the appearance and the unit functions before install the unit.Do not shorten the GPS antenna,it may lead to antenna problem.Don’t make the GPS antenna winding the steering wheel and shift lever,it will be dangerous.

Next I will tell you the installation of Toyota Verso radio gps:

1.Use a lever to pry the right and the left part and disconnect the cables

use a lever pry the right part

use a lever pry the right part

use a lever to pry the left part and disconnect the cables

use a lever to pry the left part and disconnect the cables

 

2.Remove two screws on both sides with a screwdriver and put them aside for usage once again

remove two screws on both sides with a screwdriver

remove two screws on both sides with a screwdriver

3,Pull off dashboard of the head unit

pull off dashboard of the head unit

pull off dashboard of the head unit

4.Gently disconnect the cables that connected with the dashboard

gently disconnect the cables that connected with the dashboard

gently disconnect the cables that connected with the dashboard

When you have finished these steps,you can have a look at the radio and see whether it’s same with the next image:

radio after dashboard removal

radio after dashboard removal

It’s not over yet.There are still 3 steps to accomplish it.

5.Remove screws beside the CD player and take out the CD player

6.Connect the cables as the instructions said,install your new unit in it

7.Fasten the screws in original places

It’s basically the installation steps for Toyota Verso gps nav syetem. All the dvd players are mostly same and differs at little place,so it’s normal to find some difference and there will not be any large impact.

To make sure that you can mount the gps radio more precise and safer, I will give you some tips on the installation and usage of the unit.

1.Don’t use strong chemicals, cleaners, strong detergent wash the machine.

2.Please use a clean soft fabric wipe the screen,without using ordinary fabric.

3.Please use the touch screen pen to operation unit, do not use other sharp objects, if not it will damage the screen.

4.Please protect the original display when the staff is dismounting the original CD in order to use the original screw again

For more information or encounter problems that can’t deal with,you can visit this website: http://www.seicane.com/2010-2011-2012-toyota-verso-in-car-autoradio-gps-system-bluetooth-music-am-fm-radio-cd-dvd-player-tv-tuner-3g-wifi-mp3-mp5-ipod-aux-dvr-1080p-steering-wheel-control-c133 , or ask people who worked directly in this market for help,trust that nothing will obstruct your work.

 

This entry was posted in Toyota car stereo and tagged , , . Bookmark the permalink.

One Response to 2010 2011 2012 Toyota Verso radio gps navigation system installation

  1. Lasix says:

    Viagra Bodybuilding

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>