After having a new car, a good dvd player is the next thing that buyers want to own.And the installation of it may be the remarkable one that makes us crazy.Having professional instructions is a wise choice especially when you are not so familiar with this kind of thing,11 steps of the installation for 2004-2012 w169 A150 A160 A170 A180 A200 aftermarket radio gps navigation system is necessary if you want to achieve it by yourself.Here is a picture of the head unit for w169 .
Then let’s take a look at the 11 steps of the process.
1.Remove the frame of the original CD player
In the next 4 steps, remove the screws marked with red circles with a screw driver
2.Make the screw down from the lower right
3.Make the screw down from the lower left
4.Get down the screw on the upper left
5.Get down the screw on the upper right
6.Get the original CD player removed
7.Insert the socket of unit with the plug of the car
8.Remarks: two plugs of radio antenna and GPS antenna
9.Put the unit into the dashboard
10.Use 4 screws fasten the unit and let the frame back
11.The dvd player after installation
Before you remove your original unit and install a new one, you may take a look at this video first.
If you meet other issues in your installtion, you can visit related websites or ask the workers of the market for help. After all these, you must have a general idea about w169 radio gps navigation system mount, at that time you can set out to do by yourself.
Safety is the most important during the process of installment, so you’d better pay attention to the following tips:
1.Make sure that you have done the parking series before you begin your work.
2.In case of data corruption, please don’t pull out the CD card of GPS.
3.To avoid short circuit or antenna problems, please don’t shorten or lengthen the GPS antenna.